Power Distribution
HP8440 Powerbox Power Distribution Module
The original and still the best motorsport Power Distribution Module (PDM) on the market. Able to handle up to 200 amps continuously across 34 outputs (18 high power, 16 low power).
$3,900.00
HP8441 Powerbox Power Distribution Module
The simplest way to distribute the electric power in your motorsport vehicle. Make relays and fuses redundant and add simplicity and functionality to any 12V electrical wiring system.
$2,700.01
HP8480 Intelligent Master Switch
The main function is a high power battery switch designed for current up to 1000A. The high current is
achieved by connecting 9 or 18 (depending on model) Power MOSFET, each specified to handle 250
ampere, transistors in parallel.
Additional features:
a) A low loss current sensor monitors if the battery is charged or discharged.
Both available as signal on CAN bus, and output for driving “Discharging” warning light.
b) Low power output for driving “Rain light” (independent of main switch).
c) Electronic current limit on low power outputs.
Switch Off if current above 10A for more than 1 second.
Automatic reset (switch On) after 20 seconds.
d) Temperature sensor.
e) Automatic switch to PowerDown mode after 30 seconds with Main-Switch off.
Only input 1..4 and Light output may be used then HP8480 is in Power down.
$1,292.50
HP9642 Membrane Switch Panel
The membrane panel is a supplement to the well known Powerbox. This switch panel simplifies race car wiring by only requiring two CAN bus wires and power to operate.
$1,430.00